 |
Characteristic:
1. Low energy consumption;
2. Accurate movement and precision production;
3. Low noise;
4. Rapid response; This model machines is the best choice for thin wall products such as plastic cups, plastic ice scream containers, food containers and lens etc.
Application:
Applicable for all thermoplastic material such as PP, PE, PET, PC, PS, PVC, ABS, SAN,etc., and it is used to produce preforms,caps,handles,containers,daily necessity, hardware/ kitchenware as well as other plastics products
Technical Data:
MODEL | 3850A | ||
INJECTION UNIT | A | B | |
Screw diameter | mm | 63 | 65 |
Shot size(theoretical) | Cm³ | 1120 | 1192 |
Shot weight | g | 1008 | 1072 |
Injection pressure | Mpa | 175 | 165 |
Injection rate | g/s | 320 | 340 |
Screw L/D ratio | L/D | 22.7 | 22 |
Screw speed | r.p.m | 0-160 | |
Nozzle Diameter | Srmm | 20 | |
CLAMPING | |||
Clamp tonnage | KN | 3850 | |
Toggle stroke | mm | 660 | |
Mould Thickness | mm | 280-680 | |
Space between tie-bars | mm | 680X680 | |
Ejector stroke | mm | 160 | |
Ejector tonnage | KN | 80 | |
Ejector number | Piece | 13 | |
Hole Diameter | mm | 160 | |
OTHERS | |||
Heat power | KW | 17.5 | |
Max. pump pressure | MPa | 16 | |
Pump motor power | KW | 30 | |
Valve Size | mm | 25 | |
Machine dimension | m | 7.0X2.2X2.0 | |
Machine weight | t | 11.5 | |
Oil tank capacity | L | 400 | |
Characteristic:
1. Low energy consumption;
2. Accurate movement and precision production;
3. Low noise;
4. Rapid response; This model machines is the best choice for thin wall products such as plastic cups, plastic ice scream containers, food containers and lens etc.
Application:
Applicable for all thermoplastic material such as PP, PE, PET, PC, PS, PVC, ABS, SAN,etc., and it is used to produce preforms,caps,handles,containers,daily necessity, hardware/ kitchenware as well as other plastics products
Technical Data:
MODEL | 3850A | ||
INJECTION UNIT | A | B | |
Screw diameter | mm | 63 | 65 |
Shot size(theoretical) | Cm³ | 1120 | 1192 |
Shot weight | g | 1008 | 1072 |
Injection pressure | Mpa | 175 | 165 |
Injection rate | g/s | 320 | 340 |
Screw L/D ratio | L/D | 22.7 | 22 |
Screw speed | r.p.m | 0-160 | |
Nozzle Diameter | Srmm | 20 | |
CLAMPING | |||
Clamp tonnage | KN | 3850 | |
Toggle stroke | mm | 660 | |
Mould Thickness | mm | 280-680 | |
Space between tie-bars | mm | 680X680 | |
Ejector stroke | mm | 160 | |
Ejector tonnage | KN | 80 | |
Ejector number | Piece | 13 | |
Hole Diameter | mm | 160 | |
OTHERS | |||
Heat power | KW | 17.5 | |
Max. pump pressure | MPa | 16 | |
Pump motor power | KW | 30 | |
Valve Size | mm | 25 | |
Machine dimension | m | 7.0X2.2X2.0 | |
Machine weight | t | 11.5 | |
Oil tank capacity | L | 400 | |
