 |
| Quantity: | |
|---|---|
Machine Chart:
Technical Data:
MODEL | 1800A | ||
INJECTION UNIT | A | B | |
Screw diameter | mm | 45 | 48 |
Shot size(theoretical) | Cm³ | 372 | 420 |
Shot weight | g | 335 | 378 |
Injection pressure | Mpa | 168 | 148 |
Injection rate | g/s | 142 | 160 |
Screw L/D ratio | L/D | 23.1 | 21.7 |
Screw speed | r.p.m | 0-180 | |
Nozzle Diameter | Srmm | 20 | |
CLAMPING | |||
Clamp tonnage | KN | 1800 | |
Toggle stroke | mm | 440 | |
Mould Thickness | mm | 180-470 | |
Space between tie-bars | mm | 480X460 | |
Ejector stroke | mm | 155 | |
Ejector tonnage | KN | 70 | |
Ejector number | Piece | 5 | |
Hole Diameter | mm | 125 | |
OTHERS | |||
Heat power | KW | 11 | |
Max. pump pressure | MPa | 16 | |
Pump motor power | KW | 15 | |
Valve Size | mm | 16 | |
Machine dimension | m | 5.3X1.6X1.75 | |
Machine weight | t | 5.5 | |
Oil tank capacity | L | 250 | |
Machine Chart:
Technical Data:
MODEL | 1800A | ||
INJECTION UNIT | A | B | |
Screw diameter | mm | 45 | 48 |
Shot size(theoretical) | Cm³ | 372 | 420 |
Shot weight | g | 335 | 378 |
Injection pressure | Mpa | 168 | 148 |
Injection rate | g/s | 142 | 160 |
Screw L/D ratio | L/D | 23.1 | 21.7 |
Screw speed | r.p.m | 0-180 | |
Nozzle Diameter | Srmm | 20 | |
CLAMPING | |||
Clamp tonnage | KN | 1800 | |
Toggle stroke | mm | 440 | |
Mould Thickness | mm | 180-470 | |
Space between tie-bars | mm | 480X460 | |
Ejector stroke | mm | 155 | |
Ejector tonnage | KN | 70 | |
Ejector number | Piece | 5 | |
Hole Diameter | mm | 125 | |
OTHERS | |||
Heat power | KW | 11 | |
Max. pump pressure | MPa | 16 | |
Pump motor power | KW | 15 | |
Valve Size | mm | 16 | |
Machine dimension | m | 5.3X1.6X1.75 | |
Machine weight | t | 5.5 | |
Oil tank capacity | L | 250 | |
